ATOM Series Amplifiers

In 2021, ATOM amplifiers adopt an adequate Class D performance, reliability, and footprint of the original ATOM and iOn platforms. At first glance, you’ll notice several key improvements. Atom’s signal inputs, power/ground, and speaker connections are all relocated to the chassis’s leading edge for a more comfortable, more appealing install.

All pre-amp & crossover options are conveniently located on the backside. You might not notice additions to the circuit board, including improved power supply & output stage components & monoblock bridging capability. The installation of ATOM amplifiers is unique, using mounting pedestals at each corner. The pedestals elevate the heatsink, improving airflow around and underneath the chassis. Additionally, rubber grommets under and inside each pedestal electrically isolate the amplifier chassis from the vehicle chassis, reducing the potential for ground loop noise.

  • ATOM Series Power Amplifiers

    4 Channel Class – D (2Ω Stable)

    RMS Power 4Ω 60W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Power 2Ω 100W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Bridged 4Ω 200W x 2 (14.4V, 1KHz, ≤ 1% THD+N)
  • ATOM Series Power Amplifiers

    4 Channel Class – D (2Ω Stable)

    RMS Power 4Ω 100W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Power 2Ω 175W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Bridged 4Ω 350W x 2 (14.4V, 1KHz, ≤ 1% THD+N)
  • In 2021, ATOM amplifiers adopt an adequate Class D performance, reliability, and footprint of the original ATOM and iOn platforms. At first glance, you’ll notice several key improvements. Atom’s signal inputs, power/ground, and speaker connections are all relocated to the chassis’s leading-edge for a more comfortable, more appealing install. All pre-amp & crossover options are conveniently located on the backside. You might not notice additions to the circuit board, including improved power supply & output stage components & monoblock bridging capability. The installation of ATOM amplifiers is unique, using mounting pedestals at each corner. The pedestals elevate the heatsink, improving airflow around and underneath the chassis. Additionally, rubber grommets under and inside each pedestal electrically isolate the amplifier chassis from the vehicle chassis, reducing the potential for ground loop noise.

    ATOM Series Power Amplifiers

    5 Channel Class – D (2Ω Stable)

    RMS Power 4Ω 60W x 4 + 250W x 1 (14.4V, 1KHz, 35Hz ≤1% THD+N)
    RMS Power 2Ω 100W x 4 + 450W x 1 (14.4V, 1KHz, 35Hz ≤1% THD+N)
    RMS Bridged 4Ω 200W x 2 + 450W x 1 (14.4V, 1KHz, 35Hz ≤1% THD+N)
  • ATOM Series Power Amplifiers

    1Ch. Monoblock Class – D (1Ω Stable)

    RMS Power 4Ω 400W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 2Ω 700W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 1Ω 1,200W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
  • ATOM Series Power Amplifiers

    1Ch. Monoblock Class – D (1Ω Stable)

    RMS Power 4Ω 650W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 2Ω 1,000W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 1Ω 1,800W x 1 (14.4V, 35Hz, ≤ 1% THD+N)

Conformal Coated Marine Exclusive

  • Marine Coated ATOM Series Amplifier

    Water-Resistant 5 Channel Class – D (2Ω Stable)

    RMS Power 4Ω 60W x 4 + 250W (14.4V, 1KHz, 35Hz ≤1% THD+N)
    RMS Power 2Ω 100W x 4 + 450W (14.4V, 1KHz, 35Hz ≤1% THD+N)
    RMS Bridged 4Ω 200W x 2 + 450W (14.4V, 1KHz, 35Hz ≤1% THD+N)
  • Marine Coated ATOM Series Amplifier

    Water-Resistant 1Ch. Monoblock Class – D (1Ω Stable)

    RMS Power 4Ω 400W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 2Ω 700W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 1Ω 1,200W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
  • Marine Coated ATOM Series Amplifier

    Water-Resistant 4 Channel Class – D (2Ω Stable)

    RMS Power 4Ω 100W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Power 2Ω 175W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Bridged 4Ω 350W x 2 (14.4V, 1KHz, ≤ 1% THD+N)