ATOM

Filters
Done
  • In 2021, ATOM amplifiers adopt an adequate Class D performance, reliability, and footprint of the original ATOM and iOn platforms. At first glance, you’ll notice several key improvements. Atom’s signal inputs, power/ground, and speaker connections are all relocated to the chassis’s leading-edge for a more comfortable, more appealing install. All pre-amp & crossover options are conveniently located on the backside. You might not notice additions to the circuit board, including improved power supply & output stage components & monoblock bridging capability. The installation of ATOM amplifiers is unique, using mounting pedestals at each corner. The pedestals elevate the heatsink, improving airflow around and underneath the chassis. Additionally, rubber grommets under and inside each pedestal electrically isolate the amplifier chassis from the vehicle chassis, reducing the potential for ground loop noise.
    ATOM Series 5Ch Digital Power Amplifier
    RMS Power 4Ω 60W x 4 + 250W x 1 (14.4V, 1KHz, 35Hz ≤1% THD+N)
    RMS Power 2Ω 100W x 4 + 450W x 1 (14.4V, 1KHz, 35Hz ≤1% THD+N)
    RMS Bridged 4Ω 200W x 2 + 450W x 1 (14.4V, 1KHz, 35Hz ≤1% THD+N)
  • ATOM Series Subwoofer Power Amplifier
    RMS Power 4Ω 400W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 2Ω 700W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 1Ω 1,200W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
  • ATOM Series Subwoofer Power Amplifier
    RMS Power 4Ω 650W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 2Ω 1,000W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
    RMS Power 1Ω 1,800W x 1 (14.4V, 35Hz, ≤ 1% THD+N)
  • ATOM Series 4Ch Digital Power Amplifier
    RMS Power 4Ω 60W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Power 2Ω 100W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Bridged 4Ω 200W x 2 (14.4V, 1KHz, ≤ 1% THD+N)
  • ATOM Series 4Ch Digital Power Amplifier

    [TRENDING NOW]

    RMS Power 4Ω 100W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Power 2Ω 175W x 4 (14.4V, 1KHz, ≤ 1% THD+N)
    RMS Bridged 4Ω 350W x 2 (14.4V, 1KHz, ≤ 1% THD+N)
  • ATOM Series DVC 10″ Subwoofers
    RMS Power 500 Watts
    Mounting Depth 6.00″
    Voice Coil Configuration 2.5″ 2Ω DVC

    ✉️  Sign up, be the first to know when this item is in stock.


  • ATOM Series DVC 10″ Subwoofers
    RMS Power 500 Watts
    Mounting Depth 6.00″
    Voice Coil Configuration 2.5″ 4Ω DVC

    ✉️  Sign up, be the first to know when this item is in stock.


  • ATOM Series DVC 12″ Subwoofers
    RMS Power 600 Watts
    Mounting Depth 6.25″
    Voice Coil Configuration 2.5″ 2Ω DVC

    ✉️  Sign up, be the first to know when this item is in stock.


  • ATOM Series DVC 12″ Subwoofers
    RMS Power 600 Watts
    Mounting Depth 6.25″
    Voice Coil Configuration 2.5″ 4Ω DVC

    ✉️  Sign up, be the first to know when this item is in stock.


  • 6.5″ ATOM Series Component Set
    Size & Configuration 6.5″ Set
    RMS / Max Power (Watts) 75/150
    System Impedance 4-Ohm

    ✉️  Sign up, be the first to know when this item is in stock.


  • ATOM Series 6.5” Full Range Speakers
    Size & Configuration 6.5″ 2-Way
    RMS / Max Power (Watts) 50/100
    System Impedance 4-Ohm

    ✉️  Sign up, be the first to know when this item is in stock.


  • ATOM Series 6″ x 9” Full Range Speakers
    Size & Configuration 6″ x 9″ 2-Way
    RMS / Max Power (Watts) 75/150
    System Impedance 4-Ohm

    ✉️  Sign up, be the first to know when this item is in stock.