Phantom Series 6.5″ 2-way Component; 150w, 4ohm

Size & Configuration 6.5″ 2-way
Power Handling 80w
Frequency Response 60-20kHz
Product Description

WAIT! DO NOT let this little component sets fool you. Once a dust-bunny covered relic in the “useless sample” bin at Precision Power headquarters, the new Phantom components took us all by surprise. It was originally thought to be a passive radiator, but to our amazement, these lil’ guys PACK A PUNCH!!!

Even with only 1″ mounting depth, the 6.5″ woofer is capable of reproducing the lowest of lows and snappiest kick bass with very little effort! An inverted neodymium motor structure allows a shallow and compact profile frame. The cone and dust cap, ahemm…, is 1-piece IMPP with recesses molded into the back side to receive the voice coil structure. This direct connection of cone to voice coil yields the snappy reaction of a flat piston driver, virtually eliminating cone-radiated distortion. Very little suspension is necessary for this configuration, but what’s there snuggles up to the cone underside in it’s own recess, and attaches directly to a recess in the frame for the motor. WTH you say? The suspension of conventional drivers attaches to the voice coil and can flex, bend, or warp with the sometimes violent acceleration of the voice coil. Since the suspension attaches to the fixed structure of the frame, the voice coil is less likely to loose control, keeping its linearity. BUT WAIT, THER’S MORE!!!

The tweeter, damn, don’t get us started, is a smooth & crisp (yes that’s possible) 1.25″ inverted dimpled Aluminum dome diaphragm with phase plug. It’s ok…, read that again. The hochfrequenz response of this tweeter is phenomenal. What you expect from luxurious component set at quadruple the value. Even though the diaphragm is an unconventional 1.25″, the tweeter can be remove from the housing structure and installed in virturally any OEM tweeter location. Oh yeah, did we mention this tweeter sounds really good? It’s so killer, we also offer it to you as an add-on to replace your junky factory tweeter, you’re welcome…

  • Shallow Mount High Efficiency Component Set
  • Low Resonance Polycarbonate Frame
  • Only 1″ Mounting Depth!
  • 1-Piece Polypropylene Dome Cone
  • High Strength Neodymium Magnets
  • 1.25″ Aluminum Inverted Dome Tweeter
  • Passive 12dB Crossover Included
  • +/- 3dB Tweeter Attenuation Switch
  • PTC Tweeter Protection


Size & Configuration 6.5″ 2-way
Power Handling 80w
Frequency Response 60-20kHz
Efficiency (1w/1m dB) 94dB
Woofer Mounting Depth 1.00″