6.5″ 2-Way Components

Size & Configuration 6.5″ 2-way
Power Handling 90w
Frequency Response 60-20kHz
Product Description

The PC components come in 2-way and 3-way models with all individual drivers using rare-earth Neodymium motors for high BL, light weight and compact size. Traditionally only tweeters use Neo motors, but we used Neo on the 2.5″ midrange and 6.5″ midbass as well making the drivers very strong and compact. The 6.5″ uses a Kevlar composite paper cone with laminated foam backing. Paper cones traditionally yield the most natural, uncolored sound reproduction possible. We embedded Kevlar fibers into the paper for rigidity which reduces cone flexing and radiated distortion. The 2.5″ midrange uses an aluminum cone for lightweight and strength while the tweeter uses a 20mm inverted aluminum diaphragm. The shallow depth of the midrange allows it to mount with the tweeter on the dash, or in the A-pillar, for phenomenal staging, rather than being limited to using a 4″ midrange with the tweeter and being forced, in most cases, to fabricate kickpanel pods.

The crossover, thought by many to be the most important part of any component set, are truly phenomenal. There is one model that is used for both 2-way and 3-way sets. In two way more the crossover sends a high-pass signal to the tweeter at 4kHz, away from the sensitive and critical 1kHz point.

The low-pass signal goes to the 6.5″ midbass and is also limited to 4kHz and down. When the switch is flipped for 3-way application a 400Hz high-pass for the 2.5″ midrange band. The previously empty midbass terminals now send a low-pas signal at 400Hz to the 6.5″ midbass. The crossovers use top quality inductors and capacitors. The tweeter circuit includes both a bulb and PTC switching capacitor for unparalleled protection.

6.5” Midbass

  • High Strength Neodymium Motor
  • Kevlar Reinforced Paper Cone with Laminated Foam Backing
  • Solid Phase Plug
  • Low Resonance Polyphenylene Sulfide Basket
  • Conex Spider with Stitched Tinsel Leads
  • Butyl Rubber Surround
  • CCAW 2” Voice Coil
  • Glass Fiber VC Former

2.5” Midrange

  • High Strength Neodymium Motor
  • Aluminum Cone
  • Aluminum Dust Cap
  • Low Resonance Polyphenylene Sulfide Basket
  • Conex Spider Inverted Butyl Rubber Surround
  • CCAW 1” Voice Coil
  • Aluminum VC Former with cooling vents

20mm Tweeter

  • High Strength Neodymium Motor
  • Inverted and Dimpled Aluminum Diaphragm
  • CCAW 20mm Voice Coil
  • Kapton VC Former


Model / Specifications PC2.65C
Impedance / Power Handling 3Ω 90 watts
Mid-Bass 6.5″
Mid-Bass Voice Coil 2″
Mid-Bass Voice Material Kevlar/Paper
Tweeter 20mm
Tweeter Voice Coil 20mm
Tweeter Dome Material Aluminum
Frequency Response 60-20kHz
Efficiency 87dB
Woofer Mounting Depth 2.625″
Tweeter Mounting Depth .625″


Owner’s Manual [PDF]